Teldat bintec RT1202 Bedienungsanleitung PDF herunterladen (Seite 419)

100

101

Field Description

SIP REGISTER. Normally, every SIP client (user) sends its cur-

rent position to a REGISTRAR server by means of a RE-

GISTER message. This information about the user and his cur-

rent address is held by the REGISTRAR server and queried by

other proxies to find the user.

The function is enabled with ,.

The function is enabled by default.

Apart from this standard procedure, the relevant data can also

be sent to a particular IP address that is already known to the

correspondent. Registration and authentication are not then

needed and the Registration function is disabled. An example

of this method is Microsoft Exchange SIP.

Expire Time Only if Registration is enabled.

Enter the time in seconds after which the current registration be-

comes invalid and a new registration request is therefore sent.

For clients, the external port is recognised automatically and

should not be changed.

Possible values are  to $.

The default value is .

SIP Endpoint IP Ad-

dress

Only if Registration is disabled.

For configurations with no registration (e.g. connection to a Mi-

crosoft Exchange Communication Server) the connection can

be set up as a static host. This requires you to specify the static

IP address of the terminal.

Authentication ID

Only for Interface Type = *

Enter a name that is to be used for authentication.

A maximum of 20 characters can be entered.

The name given here must also be entered on the SIP tele-

phone.

If you do not enter a name, the name in the Extension / User

Name field is used.

Teldat GmbH

20 VoIP

bintec Rxxx2/RTxxx2 405

1 2 ... 414 415 416 417 418 419 420 421 422 423 424 ... 621 622

Kommentare zu diesen Handbüchern

Keine Kommentare

Teldat bintec RT1202 Bedienungsanleitung Seite 419

Kommentare zu diesen Handbüchern